Woodpecker LED D Curing Light Unit

Description

The Woodpecker LED D Curing Light Unit is specifically designed for dental applications. It utilizes the principle of ray radiation to rapidly solidify the light-sensitive resin, providing accelerated dental restoration and material solidification for dental whitening procedures. With its advanced technology and functionality, LED D Curing Light is a valuable tool in modern dentistry. The LED D Curing Light consists of a high-power LED, an optical fiber, and a main unit. It incorporates a digital screen, a time button, and various components to ensure efficient and precise operation during dental procedures.

Key Specification 

• Rechargeable Lithium battery: ICR18490, 3.7V, 1400mAh
• Adapter: Input – AC100V-240V 50Hz/60Hz, Output – DC5.0V/1A
• Wavelength: 420nm-480nm
• Light intensity: 1000mW/cm²~1700mW/cm²
• Environment temperature: +5°C~+40°C
• Relative humidity: 30%~75%
• Atmosphere pressure: 70kPa to 106kPa

Packaging 

• 1 x curing light unit
• 1 x stand
• 1 x light protector
• 1 x charger
• 1 x optic probe
• 1 x instruction manual

Direction To Use :

– Fully charge the device for at least 4 hours before first-time usage.
– Familiarize with basic operation techniques and read the instruction manual carefully.
– Install LED.D curing light components:
– Remove red cap from optical fiber, insert metal part into main unit, and secure screw.
– Fix light hood on bottom of optical fiber.
– Set working mode: Full power, Ramping, or Pulse.
– Set solidifying time from 5 to 40 seconds.
– Press power button to start or stop emitting blue light.
– Stop operation anytime by pressing power button.
– Indicator blinks when low power detected; charge promptly.
– Clean optical fiber after use.
– Device auto shuts off after 2 minutes of inactivity; restart with any button press.
– Caution: Avoid direct eye exposure; wear protective gear when needed.