GC G-Premio Bond

 Benefits:

• Low pH (1.5) provides effective and consistent bonding
• Use in all total-etch, self-etch and selective etch bonding techniques
• Low film thickness (3 microns) enables use with resin cements to bond indirect restorations
• Universal (8th generation) bonding agent for use in direct and indirect procedures and treatment of hypersensitivity
• Up to 5 minutes working time
• Consistent bond strength with easy application
• Better dispensing control and less waste with new silicone bottle design.
• Fast technique (10 second placement and 25 seconds before placing composite)

Key Specification 

Composition : 

• Acetone
• Dimethacrylate
• Phosphoric acid ester monomer
• Dimethacrylate component
• Photoinitiator
• Butylated hydroxytoluene (BHT)

Light curing time (Halogen / LED (700-1200 mW/cm²) – 10 seconds (Distance from light guide tip<10 mm) and 20 seconds (Distance from light guide tip >10 mm)

Light curing time (High power LED more than 1200 mW/cm²) – 5 seconds (Distance from light guide tip<10 mm) and 10 seconds (Distance from light guide tip >10 mm)

Packaging 

• 1 x 5ml G-Premio bond bottle

Direction To Use 

• Leave undisturbed for 10 seconds after application.
• Dry thoroughly for 5 seconds under MAXIMUM air pressure and light cure for 10 seconds.
• For the selective etching approach, apply 35% – 40% phosphoric acid on enamel for 10 seconds prior to the application of the bonding.

 Application Time:

• 30 seconds from application time to light-cure
• Bonding Layer Thickness: Less than 3 µM