Coltene Coltolux Led Light Cure

Description

The Coltene Coltolux LED Light Cure is a dental device designed to revolutionize the polymerization process for dental restorations. With a sleek cordless pen-style design, this tool seamlessly combines portability and high output, making it an indispensable addition to any dental practice. One remarkable feature of the Coltolux LED is its innovative heat sink technology, which effectively reduces heat emission, eliminating the need for a fan. This not only ensures patient comfort during procedures but also enhances the device’s durability. Specifically engineered to match the absorption spectrum of Camphorquinone (CQ) photoinitiators, the LED light output guarantees efficient polymerization.

Key Specification

– Input Voltage: 100-240V
– Handpiece Wavelength Range: 450nm/470nm
– Peak Wavelength Range: 460nm
– Light Output Diameter: 9.0mm
– Curing Probe Diameter: 0.48″ (1.22cm)
– Body Diameter: 1.0″ (2.5cm)
– Length: 8.7″ (22cm)
– Weight: 0.22lb (100g)
– Charger Base Dimensions: Height: 2.9″ (74cm), Width: 2.5″ (6.4cm), Depth: 3.5″ (8.9cm)

Packaging

• 1 x Handpiece
• 1 x Charger Base
• 1 x Power Supply
• 3 x Light Shields
• 5 x Light Lenses
• 100 x Barrier Sleeves

Direction To Use :

– Remove protective insert by sliding release button and pulling out the insert.
– Angle top of new adapter into supply recess, slide release button, and press adapter into place.
– Insert handpiece into charger; orange light indicates charging, green when fully charged (approx. 3 hrs).
– Green light on handpiece indicates readiness after charging.
– Depress On/Off button to activate/deactivate curing light; unit beeps every 10 secs, shuts off after 20 secs.
– Check light intensity with radiometer; 300 mW/cm2 or higher is acceptable.
– Determine exposure time for polymerization per material instructions; allow cooldown for exposures over 20 secs.
– Position light shield, apply barrier sleeve, avoid direct contact with materials during activation.
– Safely terminate procedure by pressing and releasing activation button.