Bisco Modeling Resin

Description

Bisco Modeling Resin is a light-cured, low viscosity micro-filled resin formulation for use as a composite sculpting resin. The properties of composite naturally lend themselves to adhere (stick) to your instrument. To overcome this aggravating tackiness, MODELING RESIN was developed to aid in the placement and shaping of your composites. By wetting your instrument, MODELING RESIN can be used to place and manipulate (sculpt) all of your direct composite restorations.

Indications for Use:

• Composite Wetting Resin

Key specification 

• Store at room temperature (20°C/68°F – 25°C/77°F).

Packaging 

• 2 x Syringes Modeling Resin (1.5g ea.)
• 20 x Black Disposable Syringe Tips
• 1 x Instructions

Direction To Use 

• Remove the cap and place the tip on the syringe. Dispense one or two drops of MODELING RESIN into a clean mixing well or onto a mixing pad.
• Following placement of initial increment of composite to the prepared site, dip composite instrument into MODELING RESIN. With MODELING RESIN on the instrument, sculpt your restoration and manipulate the composite to the desired shape.
• Light cure. Although MODELING RESIN requires light-curing for ten (10) seconds, follow the curing time recommendations from your composite manufacturer to ensure thorough curing of composite increment. Additional composite increments will adhere to cured MODELING RESIN.