Shofu Acrylic Contouring And Finishing Kit
Original price was: $135.17.$121.78Current price is: $121.78.
In Stock- The Acrylic Contouring & Finishing Kit was specially developed for the adjustment of acrylic dentures chairside and in the laboratory.
- Designed for adjustment and polishing of acrylic dentures and appliances chairside or in the laboratory.
- It contains the necessary rotary instruments for the following steps:
- Reduction/Adjusting – Robot Carbide Cutter.
- Contouring – AcryPoint – dark grey, coarse.
- Finishing/Prepolishing – AcryPoint – brown, medium.
- Gloss Polishing – AcryPoint – light grey, fine
10 in stock
Description
Advantages :-
- Useful on domiciliary visits, at chairside in the surgery or laboratory, without the need or mess of a lathe.
- Contouring and polishing appropriate for the material involved.
- Co-ordinated and well-balanced instrument set.
- Three polishing levels in the set.
- Clean and fast polishing without additional polishing pastes.
- Easy to use, convenient and efficient.
- Comprehensive kit that can be used either chairside or in the laboratory for adjusting, fine finishing and polishing denture resin.
- Recommended average speed for Acrypoints- 5,000 to 10,000 rpm.
Key Specification
MAXIMUM PERMISSIBLE ROTATION SPEED
- AcryPoint : 15,000 min-1
- Robot Carbide Cutter : 30,000 min-1
Packaging
cryPoint x 8 :
- 2 x Coarse grit each BP1. PC2 – For Adjusting
- 1 x Medium Grit each BP1. PC2 – For Finishing
- 1 x Fine Grit each BP1. PC2 – For Polishing
Robot Carbide Burs for smooth and fast adjustment
- 1 x 0620 robot carbide bur
- 1 x 0616 robot carbide bur
- 1 x 0635 robot carbide bur
- 1 x 0667 robot carbide bu
Direction To Use
- Start with the coarsest abrasive instrument and work your way to the finest, using progressively finer grits until the desired shape and finish is achieved.
- Attach the abrasive instrument to a handpiece or slow-speed motor, following the manufacturer’s instructions.
- Hold the appliance securely and position the abrasive instrument at the desired location.
- Apply gentle pressure and move the abrasive instrument in the desired direction until the desired shape is achieved.
- Switch to a finer abrasive instrument and repeat the process until the desired finish is achieved.
- Use water or a lubricant to cool the appliance and the abrasive instrument during use.
- Remove any remaining debris or polishing compound using a soft bristle brush or a cotton swab.
- Rinse the appliance thoroughly with water and dry.
Additional information
Weight: 0.010 kg