Life Dental & Clinical Autoclave ST911EPT With Drum -14 Litres (Cream White)

Description

• All Aluminum deep-drawn Seamless construction.
• Stylish, Light, Compact, Portable Easy to use top loading autoclaves.
• Easily operate anywhere, anytime.
• Equipped with Two stages “Over Pressure” protection system incorporating a calibrated continuous bleeding pressure Stopcock and Pressure release weight valve.
• Extended life Sealing Gasket.
• Equipped with 1hr. Rotary timer.
• Customized designed Heating Element for better efficiency & longer life.
• Color-coded Pressure Gauge shows internal chamber condition during the cycle.
• Equipped with Heat resistant handles and Steam release/control valve.

Key specification 

– Model No.: ST911EPT
– Electric with Rotary Timer
– Finish: Epoxy Powder coated
– Vol. Capacity: 14-15 liters
– Power supply: 220V, Wattage: 1000W

Packaging

Accessories with Autoclave.

• 1 x Outer MS Stand
• 1 x Inner Tripod Stand
• 1 x Dressing Drum
• 1 x Power Cable

Direction To Use 

– Place the autoclave on the black steel stand and sterilizing material on a table or shelf.
– Fill distilled or de-ionized water in the base chamber up to the level of the tripod stand.
– Load the dressing drum with sterilizing material and close the lid by pressing down and turning clockwise.
– Tighten both steam release knobs.
– Connect the electric cord to the socket, plug into the mains (220/240V, 50Hz), and switch on the power.
– Rotate the timer knob to the desired sterilization time (40-50 min) to start heating.
– Once steam generation begins, pressure will rise on the pressure gauge.
– Maintain pressure at 15±1 psi throughout the cycle; excess steam will exit from the stopcock.
– The autoclave will automatically turn off when the specified time is reached.
– Depressurize the unit by slowly loosening the steam release knob.
– Ensure no steam remains, and the pressure gauge reads 0 psi before opening the lid.