GC Tempron

Description

Tempron is a tooth colored temporary crown and bridge resin which is applied to the prepared areas of the tooth by placing it into the desired area of the impression which is reseated in the patient’s mouth.

INDICATION

• For the preparation of temporary crowns, bridges or dentures. Space maintenance.

Key Specification 

Composition :

• Powder –  Copolymer of Methylmethacrylate and Diethyl phthalate, Polymethylmethacrylate
• Liquid – Methyl methacrylate, N,N-dimethyl-p-toluidine

Packaging 

• 1 x 100g Powder
• 1 x 104ml Liquid
• 1 x Powder Measure
• 1 x Liquid Measure No.4
• 1 x Mixing Cup

Direction To Use;

A. CROWNS
1. PREPARATION
– Fill tooth defects with GC CAVITON or equivalent.
– Take impression with heavy alginate, wrap in wet gauze.
– Prepare tooth for crowning.
– Cut V notches in impression for excess resin escape.

2. MIXING
– Ratio: 1.0g powder / 0.5mL liquid.
– Add liquid to mixing jar, slowly add powder.
– Mix for 20-30 seconds.

3. APPLICATION
– Pour paste into impression, seat tightly.
– Remove impression after 3 minutes.
– Dip crown in hot water to prevent shrinkage.
– Trim excess, polish.
– Cement with GC FREEGENOL or similar.

B. BRIDGES
1. PREPARATION
– Fix artificial tooth between abutment teeth with wax.
– Take full arch alginate impression, wrap in wet gauze.
– Prepare abutment teeth.
– Follow steps A.1(a) to A.3(e) for crown procedures.