Voco Meron Set & liquid

• metal-based crowns, bridges, inlays and onlays
• high-strength all-ceramic crowns and bridges
• metal-based and high-strength all-ceramic crowns and bridges on implant abutments
• metal root posts or indirect metal post core build-ups
• prefabricated steel crowns
• orthodontic bands

Key Specification

• Composition: Calcium aluminium fluorosilicate glass – Water – Polyacrylic acid – Tartaric acid – Parabens
• Working Temperature Range: 15°C – 23°C

Packaging:

– Meron Set:
– 1 x Liquid 15ml
– 1 x Powder 35g

– Meron – Liquid 15ml:
– 1 x Liquid 15ml

Direction To Use :

– Surface Preparation:
– Clean and dry enamel, dentine, and cavity surfaces thoroughly.
– Clean cores, rinse well, and avoid excessive drying.
– Ensure sufficient residual dentine thickness for pulp protection.

– Mixing:
– Shake powder container before use.
– Maintain working temperature (15°C – 23°C).
– Use one drop of liquid for one level measuring scoop of powder (3.0:1 powder/liquid ratio).

– Mixing Procedure:
– Hold liquid dropper vertically.
– Divide powder into three portions, mixing gradually into the liquid.

– Application:
– Meron has a 3-minute working time, sets in 3-5 minutes.
– Achieve correct consistency with a hard brush.
– Prevent water and saliva contact during application.

– Post-Application:
– Remove excess material during rubber-elastic phase.
– Ensure removal of varnish and isolating agents before final luting.
– Rinse instruments with cold water immediately after use.

– Storage:
– Close containers securely after use.
– Store Meron between 4°C and 23°C.
– Do not use past the expiry date.

– Disposal:
– Dispose of the product according to local regulations.